3.4 MΩ resistor colour code
Five bands: Orange · Yellow · Black · Yellow · Brown. The first three give the digits — a precision value needs all three — then the multiplier, then how far off the real part may be.
Nominal
3.4 MΩ
3,400,000 ohms
Real range at ±1%
3.366 MΩ – 3.434 MΩ
A brown band allows this much drift.
Series
E96
A 1% precision value. Five bands, not four.
Band by band
| Band | Colour | Meaning |
|---|---|---|
| 1 | Orange | 1st digit — 3 |
| 2 | Yellow | 2nd digit — 4 |
| 3 | Black | 3rd digit — 0 |
| 4 | Yellow | Multiplier — ×10k |
| 5 | Brown | Tolerance — ±1% |
How much it can take
Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.
| Across it | Current | Dissipated | Package to pick |
|---|---|---|---|
| 3.3 V | 0.971 µA | 3.2 µW | 1/8 W |
| 5 V | 1.47 µA | 7.35 µW | 1/8 W |
| 12 V | 3.53 µA | 42.4 µW | 1/8 W |
| 24 V | 7.06 µA | 169 µW | 1/8 W |
What you can actually get
Parts made
12
853rd most of 1,465 values
In stock
0
across 0 of them
Cheapest at 100
$0.0069
each
Tolerances sold
±0.5% to ±1%
Packages: 1206, 0805, 0603, 2010, 2512, 0402. Ratings: 63mW to 1W.
What ten of them actually cost
The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.
Ten pieces
$0.21
$0.021 each · Cut Tape (CT) · minimum order 1
The reel price
$0.00218
each, but only from 100,000 pieces up
Sitting in stock
188,212
across 10 part numbers
Per piece, ten costs 9.6× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.
Stocked in ±0.1% and ±1%, rated 1/16 W to 0.52 W.
Cheapest part you can buy ten of: RC0402FR-073M4L by YAGEO — see it at Digi-Key.
Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.
The same value, marked differently
Values that can overlap this one
At ±1% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 3.4 MΩ — which is why measuring beats reading when it matters.
If you do not have one
Standard values that land within 1% of 3.4 MΩ when combined.