3.48 MΩ resistor colour code
Five bands: Orange · Yellow · Grey · Yellow · Brown. The first three give the digits — a precision value needs all three — then the multiplier, then how far off the real part may be.
Nominal
3.48 MΩ
3,480,000 ohms
Real range at ±1%
3.4452 MΩ – 3.5148 MΩ
A brown band allows this much drift.
Series
E96
A 1% precision value. Five bands, not four.
Band by band
| Band | Colour | Meaning |
|---|---|---|
| 1 | Orange | 1st digit — 3 |
| 2 | Yellow | 2nd digit — 4 |
| 3 | Grey | 3rd digit — 8 |
| 4 | Yellow | Multiplier — ×10k |
| 5 | Brown | Tolerance — ±1% |
How much it can take
Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.
| Across it | Current | Dissipated | Package to pick |
|---|---|---|---|
| 3.3 V | 0.948 µA | 3.13 µW | 1/8 W |
| 5 V | 1.44 µA | 7.18 µW | 1/8 W |
| 12 V | 3.45 µA | 41.4 µW | 1/8 W |
| 24 V | 6.9 µA | 166 µW | 1/8 W |
What you can actually get
Parts made
28
675th most of 1,465 values
In stock
0
across 0 of them
Cheapest at 100
$0.0104
each
Tolerances sold
±0.25% to ±1%
3 grades in all
Packages: 0805, 1206, 0603, 0201, 2512, 2010, 1210. Ratings: 50mW to 1W.
What ten of them actually cost
The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.
Ten pieces
$0.21
$0.021 each · Cut Tape (CT) · minimum order 1
The reel price
$0.00206
each, but only from 150,000 pieces up
Sitting in stock
282,918
across 15 part numbers
Per piece, ten costs 10.2× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.
Stocked in ±1%, rated 1/32 W to 1/4 W.
Cheapest part you can buy ten of: RC0402FR-073M48L by YAGEO — see it at Digi-Key.
Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.
The same value, marked differently
Values that can overlap this one
At ±1% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 3.48 MΩ — which is why measuring beats reading when it matters.
If you do not have one
Standard values that land within 1% of 3.48 MΩ when combined.