Skip to content
Ohm Bands

9.1 MΩ resistor colour code

Four bands: White · Brown · Green · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

91×100k±5%
White9Brown1Green×100,000Gold±5%

Nominal

9.1 MΩ

9,100,000 ohms

Real range at ±5%

8.645 MΩ – 9.555 MΩ

A gold band allows this much drift.

Series

E24

E24 only — stocked less often.


Band by band

BandColourMeaning
1White1st digit — 9
2Brown2nd digit — 1
3GreenMultiplier — ×100,000
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V0.363 µA1.2 µW1/8 W
5 V0.549 µA2.75 µW1/8 W
12 V1.32 µA15.8 µW1/8 W
24 V2.64 µA63.3 µW1/8 W

What you can actually get

Parts made

59

607th most of 1,465 values

In stock

0

across 0 of them

Cheapest at 100

$0.0065

each

Tolerances sold

±0.5% to ±5%

4 grades in all

Packages: 1206, 0805, 2010, 0603, 1210, 0402, 2512, 0201. Ratings: 50mW to 7W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$0.21

$0.021 each · Cut Tape (CT) · minimum order 1

The reel price

$0.00218

each, but only from 100,000 pieces up

Sitting in stock

387,541

across 21 part numbers

Per piece, ten costs 9.6× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±1% and ±5%, rated 1/20 W to 1/2 W.

Cheapest part you can buy ten of: RC0402FR-079M1L by YAGEO — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

915· three-digit

9104· four-digit, precision parts

Five bands

WhiteBrownBlackYellowBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 9.1 MΩ — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 9.1 MΩ when combined.