90.9 kΩ resistor colour code
Five bands: White · Black · White · Red · Brown. The first three give the digits — a precision value needs all three — then the multiplier, then how far off the real part may be.
Nominal
90.9 kΩ
90,900 ohms
Real range at ±1%
89.991 kΩ – 91.809 kΩ
A brown band allows this much drift.
Series
E96
A 1% precision value. Five bands, not four.
Band by band
| Band | Colour | Meaning |
|---|---|---|
| 1 | White | 1st digit — 9 |
| 2 | Black | 2nd digit — 0 |
| 3 | White | 3rd digit — 9 |
| 4 | Red | Multiplier — ×100 |
| 5 | Brown | Tolerance — ±1% |
How much it can take
Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.
| Across it | Current | Dissipated | Package to pick |
|---|---|---|---|
| 3.3 V | 36.3 µA | 120 µW | 1/8 W |
| 5 V | 55 µA | 275 µW | 1/8 W |
| 12 V | 132 µA | 1.58 mW | 1/8 W |
| 24 V | 264 µA | 6.34 mW | 1/8 W |
What you can actually get
Parts made
105
175th most of 1,465 values
In stock
4,742
across 1 of them
Cheapest at 100
$0.0027
each
Tolerances sold
±0.05% to ±1%
5 grades in all
Packages: 0805, 1206, 0603, 0402, 1210, 2512, 0201, SMD,3.2x1.6mm. Ratings: 30mW to 2W.
What ten of them actually cost
The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.
Ten pieces
$0.14
$0.014 each · Cut Tape (CT) · minimum order 1
The reel price
$0.00103
each, but only from 100,000 pieces up
Sitting in stock
2,410,873
across 50 part numbers
Per piece, ten costs 13.6× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.
Stocked in ±0.1% and ±1%, rated 1/20 W to 0.21 W.
Cheapest part you can buy ten of: RNCP0805FTD90K9 by Stackpole Electronics Inc — see it at Digi-Key.
Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.
The same value, marked differently
Values that can overlap this one
At ±1% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 90.9 kΩ — which is why measuring beats reading when it matters.
If you do not have one
Standard values that land within 1% of 90.9 kΩ when combined.