Skip to content
Ohm Bands

2 kΩ resistor colour code

Four bands: Red · Black · Red · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

20×100±5%
Red2Black0Red×100Gold±5%

Nominal

2 kΩ

2,000 ohms

Real range at ±5%

1.9 kΩ – 2.1 kΩ

A gold band allows this much drift.

Series

E24

E24 only — stocked less often.


Band by band

BandColourMeaning
1Red1st digit — 2
2Black2nd digit — 0
3RedMultiplier — ×100
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V1.65 mA5.44 mW1/8 W
5 V2.5 mA12.5 mW1/8 W
12 V6 mA72 mW1/4 W
24 V12 mA288 mW1 W

What you can actually get

Parts made

233

8th most of 1,465 values

In stock

90,958

across 15 of them

Cheapest at 100

$0.0013

each

Tolerances sold

±0.01% to ±5%

11 grades in all

Packages: 0805, 1206, 0603, 0402, 1210, 2512, 2010, 0201. Ratings: 30mW to 35W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$0.31

$0.031 each · Cut Tape (CT) · minimum order 1

The reel price

$0.00406

each, but only from 100,000 pieces up

Sitting in stock

3,746,000

across 1 part numbers

Per piece, ten costs 7.6× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±1%, rated 1/10 W.

Cheapest part you can buy ten of: ERJ-2RKF2001X by Panasonic Industry — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

202· three-digit

2001· four-digit, precision parts

30D· EIA-96, for the smallest parts

Five bands

RedBlackBlackRedBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 2 kΩ — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 2 kΩ when combined.