Skip to content
Ohm Bands

2.2 MΩ resistor colour code

Four bands: Red · Red · Green · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

22×100k±5%
Red2Red2Green×100,000Gold±5%

Nominal

2.2 MΩ

2,200,000 ohms

Real range at ±5%

2.09 MΩ – 2.31 MΩ

A gold band allows this much drift.

Series

E6

Held in almost every parts drawer.


Band by band

BandColourMeaning
1Red1st digit — 2
2Red2nd digit — 2
3GreenMultiplier — ×100,000
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V1.5 µA4.95 µW1/8 W
5 V2.27 µA11.4 µW1/8 W
12 V5.45 µA65.5 µW1/8 W
24 V10.9 µA262 µW1/8 W

What you can actually get

Parts made

88

366th most of 1,465 values

In stock

3,857

across 1 of them

Cheapest at 100

$0.0016

each

Tolerances sold

±0.1% to ±5%

6 grades in all

Packages: 0402, 0805, 0603, 1206, 1210, 2512, 2010, 0201. Ratings: 30mW to 10W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$0.20

$0.020 each · Cut Tape (CT) · minimum order 1

The reel price

$0.00196

each, but only from 500,000 pieces up

Sitting in stock

2,500,719

across 31 part numbers

Per piece, ten costs 10.2× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±0.1% and ±1% and ±5%, rated 1/20 W to 1/4 W.

Cheapest part you can buy ten of: RMCF0603JT2M20 by Stackpole Electronics Inc — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

225· three-digit

2204· four-digit, precision parts

Five bands

RedRedBlackGreenBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 2.2 MΩ — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 2.2 MΩ when combined.