Skip to content
Ohm Bands

10 Ω resistor colour code

Four bands: Brown · Black · Black · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

10×1±5%
Brown1Black0Black×1Gold±5%

Nominal

10 Ω

10 ohms

Real range at ±5%

9.5 Ω – 10.5 Ω

A gold band allows this much drift.

Series

E6

Held in almost every parts drawer.


Band by band

BandColourMeaning
1Brown1st digit — 1
2Black2nd digit — 0
3BlackMultiplier — ×1
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V330 mA1.09 W5 W
5 V500 mA2.5 W5 W
12 V1.2 A14.4 Wno standard part — needs a power resistor or a heatsink
24 V2.4 A57.6 Wno standard part — needs a power resistor or a heatsink

What you can actually get

Parts made

262

5th most of 1,465 values

In stock

471,804

across 20 of them

Cheapest at 100

$0.0005

each

Tolerances sold

±0.01% to ±20%

9 grades in all

Packages: 0603, 0805, 0402, 1206, 1210, 2512, TO-220, 1218. Ratings: 20mW to 100W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$0.21

$0.021 each · Cut Tape (CT) · minimum order 1

The reel price

$0.00251

each, but only from 50,000 pieces up

Sitting in stock

8,163,873

across 3 part numbers

Per piece, ten costs 8.4× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±1%, rated 1/16 W to 1/10 W.

Cheapest part you can buy ten of: RMCF0603FT10R0 by Stackpole Electronics Inc — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

100· three-digit

1000· four-digit, precision parts

01H· EIA-96, for the smallest parts

Five bands

BrownBlackBlackBlackBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 10 Ω — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 10 Ω when combined.