Skip to content
Ohm Bands

1.5 MΩ resistor colour code

Four bands: Brown · Green · Green · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

15×100k±5%
Brown1Green5Green×100,000Gold±5%

Nominal

1.5 MΩ

1,500,000 ohms

Real range at ±5%

1.425 MΩ – 1.575 MΩ

A gold band allows this much drift.

Series

E6

Held in almost every parts drawer.


Band by band

BandColourMeaning
1Brown1st digit — 1
2Green2nd digit — 5
3GreenMultiplier — ×100,000
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V2.2 µA7.26 µW1/8 W
5 V3.33 µA16.7 µW1/8 W
12 V8 µA96 µW1/8 W
24 V16 µA384 µW1/8 W

What you can actually get

Parts made

115

147th most of 1,465 values

In stock

14,415

across 8 of them

Cheapest at 100

$0.0009

each

Tolerances sold

±0.1% to ±5%

6 grades in all

Packages: 0805, 1206, 0603, 2512, 0402, 2010, 1210, 0612. Ratings: 30mW to 7W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$7.46

$0.75 each · Cut Tape (CT) · minimum order 1

The reel price

$0.28

each, but only from 28,000 pieces up

Sitting in stock

37,463

across 3 part numbers

Per piece, ten costs 2.7× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±1%, rated 3 W to 6 W.

Cheapest part you can buy ten of: WSLF25121L500FEA by Vishay Dale — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

155· three-digit

1504· four-digit, precision parts

Five bands

BrownGreenBlackYellowBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 1.5 MΩ — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 1.5 MΩ when combined.