Skip to content
Ohm Bands

1.1 MΩ resistor colour code

Four bands: Brown · Brown · Green · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

11×100k±5%
Brown1Brown1Green×100,000Gold±5%

Nominal

1.1 MΩ

1,100,000 ohms

Real range at ±5%

1.045 MΩ – 1.155 MΩ

A gold band allows this much drift.

Series

E24

E24 only — stocked less often.


Band by band

BandColourMeaning
1Brown1st digit — 1
2Brown2nd digit — 1
3GreenMultiplier — ×100,000
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V3 µA9.9 µW1/8 W
5 V4.55 µA22.7 µW1/8 W
12 V10.9 µA131 µW1/8 W
24 V21.8 µA524 µW1/8 W

What you can actually get

Parts made

72

538th most of 1,465 values

In stock

0

across 0 of them

Cheapest at 100

$0.0057

each

Tolerances sold

±0.1% to ±5%

6 grades in all

Packages: 0805, 1206, 0402, 2010, 1210, 0603, 2512, 0201. Ratings: 30mW to 3W.

What ten of them actually cost

The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.

Ten pieces

$0.23

$0.023 each · Cut Tape (CT) · minimum order 1

The reel price

$0.00267

each, but only from 100,000 pieces up

Sitting in stock

532,194

across 16 part numbers

Per piece, ten costs 8.6× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.

Stocked in ±1% and ±5%, rated 1/16 W to 1/4 W.

Cheapest part you can buy ten of: RMCF0402FT1M10 by Stackpole Electronics Inc — see it at Digi-Key.

Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

115· three-digit

1104· four-digit, precision parts

Five bands

BrownBrownBlackYellowBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 1.1 MΩ — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 1.1 MΩ when combined.