Skip to content
Ohm Bands

1.1 Ω resistor colour code

Four bands: Brown · Brown · Gold · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.

11×0.1±5%
Brown1Brown1Gold×0.1Gold±5%

Nominal

1.1 Ω

1.1 ohms

Real range at ±5%

1.045 Ω – 1.155 Ω

A gold band allows this much drift.

Series

E24

E24 only — stocked less often.


Band by band

BandColourMeaning
1Brown1st digit — 1
2Brown2nd digit — 1
3GoldMultiplier — ×0.1
4GoldTolerance — ±5%

How much it can take

Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.

Across itCurrentDissipatedPackage to pick
3.3 V3 A9.9 Wno standard part — needs a power resistor or a heatsink
5 V4.55 A22.7 Wno standard part — needs a power resistor or a heatsink
12 V10.9 A131 Wno standard part — needs a power resistor or a heatsink
24 V21.8 A524 Wno standard part — needs a power resistor or a heatsink

What you can actually get

Parts made

102

194th most of 1,465 values

In stock

5,000

across 1 of them

Cheapest at 100

$0.0015

each

Tolerances sold

±0.1% to ±5%

5 grades in all

Packages: 0805, 0603, 1206, 0402, 1210, 2512, 2010, 0204. Ratings: 50mW to 10W.

Assembly stock from the JLCPCB library, read 2026-09-24. That is what a board house will place for you — not everything a distributor sells.

The same value, marked differently

Surface mount

1R1· three-digit

1R10· four-digit, precision parts

05A· EIA-96, for the smallest parts

Five bands

BrownBrownBlackSilverBrown

Three significant digits and a ±1% band.

Values that can overlap this one

At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 1.1 Ω — which is why measuring beats reading when it matters.

If you do not have one

Standard values that land within 1% of 1.1 Ω when combined.