0.12 Ω resistor colour code
Four bands: Brown · Red · Silver · Gold. The first two give the digits, the third multiplies, the fourth states how far off the real part may be.
Below 1 Ω a resistor stops being a resistor in the usual sense. Values like this sit in series with a load so a circuit can measure the current through them, or they limit inrush. The silver multiplier band is what takes the value under one ohm — and nothing takes it below 0.1 Ω, because no colour means ×0.001. Smaller shunts exist; their value is printed on the body instead.
Nominal
0.12 Ω
0.12 ohms
Real range at ±5%
0.114 Ω – 0.126 Ω
A gold band allows this much drift.
Series
E12
A current-sense value. Rarely in a hobby parts drawer.
Band by band
| Band | Colour | Meaning |
|---|---|---|
| 1 | Brown | 1st digit — 1 |
| 2 | Red | 2nd digit — 2 |
| 3 | Silver | Multiplier — ×0.01 |
| 4 | Gold | Tolerance — ±5% |
How much it can take
Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.
| Across it | Current | Dissipated | Package to pick |
|---|---|---|---|
| 3.3 V | 27.5 A | 90.8 W | no standard part — needs a power resistor or a heatsink |
| 5 V | 41.7 A | 208 W | no standard part — needs a power resistor or a heatsink |
| 12 V | 100 A | 1200 W | no standard part — needs a power resistor or a heatsink |
| 24 V | 200 A | 4800 W | no standard part — needs a power resistor or a heatsink |
What you can actually get
Standard on paper, absent from the shelf.
0.12 Ω is a proper E12 value, but no part carrying it is currently held for assembly.
Assembly stock from the JLCPCB library, read 2026-09-24. That is what a board house will place for you — not everything a distributor sells.
The same value, marked differently
Values that can overlap this one
At ±5% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 0.12 Ω — which is why measuring beats reading when it matters.
If you do not have one
Standard values that land within 1% of 0.12 Ω when combined.