SMD code 0R3 — 0.3 Ω
A surface-mount resistor has no bands. This one is a three-digit marking: the R is the decimal point — 0.3 Ω. Parts marked this way are usually ±5% or ±2%.
0R3
reads as
0.3 Ω
The same part, in bands
The through-hole version of 0.3 Ω carries 4 colour bands instead.
Everything about 0.3 Ω — power ratings, what ten cost, what is in stock.
Same value, other markings
0.3 Ω is printed several ways depending on the part's precision and size. A board can carry all of them at once.
How much it can take
| Across it | Dissipated | Smallest package that copes |
|---|---|---|
| 5 V | 83.3 W | no standard part — needs a power resistor or a heatsink |
| 12 V | 480 W | no standard part — needs a power resistor or a heatsink |
Codes you will mistake it for
One character apart from 0R3. On a 0402 part these are a fraction of a millimetre of printing — worth a second look before you solder.