3.01 MΩ resistor colour code
Five bands: Orange · Black · Brown · Yellow · Brown. The first three give the digits — a precision value needs all three — then the multiplier, then how far off the real part may be.
Nominal
3.01 MΩ
3,010,000 ohms
Real range at ±1%
2.9799 MΩ – 3.0401 MΩ
A brown band allows this much drift.
Series
E96
A 1% precision value. Five bands, not four.
Band by band
| Band | Colour | Meaning |
|---|---|---|
| 1 | Orange | 1st digit — 3 |
| 2 | Black | 2nd digit — 0 |
| 3 | Brown | 3rd digit — 1 |
| 4 | Yellow | Multiplier — ×10k |
| 5 | Brown | Tolerance — ±1% |
How much it can take
Current and dissipation across the resistor, and the package you need. The suggested rating keeps a factor of two in hand, which is what anyone building a board actually does.
| Across it | Current | Dissipated | Package to pick |
|---|---|---|---|
| 3.3 V | 1.1 µA | 3.62 µW | 1/8 W |
| 5 V | 1.66 µA | 8.31 µW | 1/8 W |
| 12 V | 3.99 µA | 47.8 µW | 1/8 W |
| 24 V | 7.97 µA | 191 µW | 1/8 W |
What you can actually get
Parts made
25
705th most of 1,465 values
In stock
0
across 0 of them
Cheapest at 100
$0.0091
each
Tolerances sold
±0.25% to ±1%
3 grades in all
Packages: 1206, 0805, 0603, 0402, 0201, 1210, 0204, 2512. Ratings: 50mW to 1W.
What ten of them actually cost
The price everyone quotes is the reel price. If you want ten, you cannot buy the reel — and the real figure is usually several times higher per piece.
Ten pieces
$0.13
$0.013 each · Strip · minimum order 10
The reel price
$0.00218
each, but only from 100,000 pieces up
Sitting in stock
568,353
across 37 part numbers
Per piece, ten costs 6.0× the reel price. That gap is why a handful of resistors never costs what the headline price suggests.
Stocked in ±0.5% and ±1%, rated 1/32 W to 1/4 W.
Cheapest part you can buy ten of: AGCR0603-QL-3014FT-CT by Venkel — see it at Digi-Key.
Assembly stock from the JLCPCB library, read 2026-09-24. Retail prices and stock from Digi-Key, read 2026-09-24. Prices move — check the product page before ordering. That is what a board house will place for you — not everything a distributor sells.
The same value, marked differently
Values that can overlap this one
At ±1% the tolerance bands of neighbouring values run into each other. A part sold as one of these could measure the same as a 3.01 MΩ — which is why measuring beats reading when it matters.
If you do not have one
Standard values that land within 1% of 3.01 MΩ when combined.